Nuts Chemical Feeds Onion Dehydrated Vegetables Fruit Vacuum Tray Drying Machine

• Customization: Available
• Movement Way: Fixed
• Flow: Cross Flow
• Model NO.: FZG
• Heating Mode: Transmission
• Material Status: Powder, Cream
• Drying Medium: Superheated Steam
• Operational Method: Intermittent
• Type: Vacuum Disc
• Trademark: Pharmao
• Origin: China
• HS Code: 84193990
• Production Capacity: 300kg/Batch

Product Description

Overview:
The vacuum drying is to heat and dry the material under the vacuum condition, at the same time, the vacuum pump is used for pumping and dehumidification to make the working chamber in a vacuum state, and the water volatilized from the material is pumped away by the vacuum pump, and the drying rate of the material is greatly accelerated. At the same time, the energy is saved. There is basically no temperature difference between the top and bottom of the dryer, and the whole machine meets the requirements of GMP standards.

Feature

• The top of the equipment is round shape, which solves the phenomenon of steam droplets.
• The vacuum dryer produced by our factory has the advantages of more uniform vacuum and dehumidification, and the drying effect is better.
• For the production of food and medicine, because of the principle of high vacuum and low temperature, the color, fragrance and taste of the product can be guaranteed to the utmost.
• Since the inside of the vacuum chamber is isolated from the outside, the product can be protected from contamination.
• It is belongs to static drying, so the shape of the dry material will not be damaged.
• This equipment can be sterilized by steam.

Equipment configuration

1. The inner wall of the vacuum drying chamber is made of stainless steel, and the inner wall is surrounded by a circular arc to prevent the condensation water from being precipitated out, and there is an 80mm insulation layer in the middle;
2. The heating tube are ф18*2 stainless steel tubes, and 96 pieces of 640*460*45 standard trays.
3. The vacuum chamber is equipped with safety valve, sight glass and thermometer, which is safe and simple to operate;
4. Flange, handle and other components are made of stainless steel.

Technical Parameters

1. Number of drying racks: 12 layers
2. Layer to layer spacing distance: 90mm
3. Tray size: 640 × 460 × 45mm
4. Number of drying trays: 96
5. Batch input capacity: 300 kg
6. Internal drying chamber size: 1500×2440×1400mm
7. Drying rack working temperature: -35 ~ 150 ° C
8. Vacuum degree when no loading in vacuum chamber: 1333Pa
9. Drying rack in-tube working pressure: 0.784Mpa
10. Drying chamber weight: 4800Kg

Main components list:

No.	Name	Specification and model	Qty	Remark
1	Safety valve	A21X-16P	1 pcs	Stainless steel
2	Mirror glass	SJ-25	6 pcs	Φ140*20 tempered borosilicate
3	Bearing	7205G	8 pcs	GB297-94
4	Bimetallic thermometer	WSS-401	1 pcs	0~0.1Mpa
5	Vacuum gauge	Z-100	1 pcs	Mushroom shape
6	Sealing strip	30*18 silicone rubber	12 meters
7	Vacuum dryer main machine body	Internal and external SUS304	1 set	Inner wall full weld, circular arc transition
8	Stainless steel drying rack	12 layers	1 set	SS304
9	Stainless steel drying trays	640*460*45mm	96 pcs	One time molding SUS304